LED Plant growth light Introduction
- Thursday November 26th, 2015
The LED Plant growth light is the lamp to help the plant growth by Irradiate wavelength as like as the sun.
The growth light is using for the indoor plant, normally a lot of indoor plant will become worst and worst over time. The main reason of this issue is because the indoor plant do not get enough Irradiate from the sun, and the LED growth light can help with the indoor plant to get enough irradiate therefore it can improve the life cycle and the quality of the plant.
The LED plant growth light can also help the agricultural products in greenhouse, and also it can solve the Inadequate irradiate issue, specially (Tomato, cucumber). On the other hand the winter agricultural products can arrive to the market before spring.
LED Grow Light : End Product | |
Power Dissipation | 50W |
Forward Voltage | 85-265V |
Size | φ175*H60mm |
Color | Red : Blue = 8:1 |
LED Grow Light : SMD | |
Power Dissipation | 1.5W |
Forward Voltage | 2.8-3.6V |
View Angle | 120 |
Size | 3.5mm×3.5mm SMT LED, 2mm thickness |
Color | Blue 450-470mn |
LED Grow Light : SMD | |
Power Dissipation | 1W |
Forward Voltage | 1.8-2.6V |
View Angle | 120 |
Size | 3.5mm×3.5mm SMT LED, 2mm thickness |
Color | Red 640-660mn |
LED Grow Light : SMD | |
Power Dissipation | 1.5W |
Forward Voltage | 3.3-3.8V |
View Angle | 120 |
Size | 3.5mm×3.5mm SMT LED, 2mm thickness |
Color | Violet 390-405mn |
Effective for the plant (Wavelength):
280nm ~ 315nm Will not have any effective by plant.
315nm ~ 420nm Chlorophyll absorb less influence light cycle effect, prevent stem elongation.
420nm ~ 500nm (BLUE) Chlorophyll and carotenoids absorb the largest proportion, the greatest impact on Photosynthesis.
500nm ~ 620nm Pigment absorption rate is not high.
620nm ~ 750nm Chlorophyll absorption rate “high”, has a significant influence on photosynthesis and photoperiod effect.
750nm ~ 1000nm Absorption rate is low, stimulate cell extended, affecting flowering and seed germination.
>1000nm Converted into heat.